ZOELLER 267-0002 WASTE-MATE 1/2 HP NON-AUTOMATIC SEWAGE PUMP

Description

Zoeller Waste-Mate 267-0002 Sewage Pump, 1/2 HP Non-Automatic
– Heavy-Duty Submersible Sewage, Effluent or Dewatering Pump
Zoeller Waste-Mate 267 is a heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP
Ideal for residential & commercial use; Passes 2" spherical solid waste with plastic impeller
Switch-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design
Durable cast engineered construction utilizes ASTM Class 25 cast iron for switch case & pump housing
About Us
Founded in the family basement in 1939, Zoeller Pump Company is one of the oldest family-owned water pump manufacturers in North America. Over the past seven decades, Zoeller Pump Company has established itself as a dependable leader in the wastewater industry. Through continuous research and development, we are always improving our products and processes to provide the highest possible quality to our loyal customers and end users.
Zoeller Waste-Mate 267 Sewage Pump
HEAVY-DUTY SUBMERSIBLE SEWAGE, EFFLUENT OR DEWATERING PUMP
Zoeller Waste-Mate 267 is considered one of America’s most popular sewage ejectors and is known for reliability, durability, and performance. Each sewage pump is industry-proven and constructed using cast iron and stainless-steel hardware with an integral, 2-pole, snap-action float switch. The heat-dissipating cast iron body has a powder coated epoxy finish that provides maximum pumping performance under the most extreme conditions, a cool run design, and a non-clogging vortex impeller.
Made in the USA using a majority of US content
1/2 HP submersible sewage pump, 100% factory tested
Automatic and non-automatic options available
2" NPT discharge, passes 2" spherical solids
Performance: 128 GPM at 5' TDH, shut-off: 21.5' TDH
Cast iron construction
Waste-Mate 267 Specifications
Zoeller Waste-Mate 266 sewage pump has an engineered plastic base, while Zoeller Waste-Mate 267 sewage pump has a cast-iron base. Each model has a non-clogging vortex design that utilizes either a plastic or cast-iron impeller to disintegrate and pass solids up to 2” (spherical).
All pumps are completely submersible, hermetically sealed to be watertight and dust-tight, and utilize stainless steel components, such as screws, bolts, handle, guard and arm,
and seal assembly. The shaft seal is manufactured from carbon and ceramic, while the square ring and gasket are Neoprene. Both Zoeller Waste-Mate 266 and 267 sewage pumps are ideal for residential, commercial, and new construction uses, and have a powder coated epoxy finish that provides maximum pumping performance under the most extreme conditions.
Superior Performance, Reliability, & Durability
Zoeller Waste-Mate 266 and 267 are ideal for:
Residential Sewage and Dewatering
Light Commercial Sewage and Dewatering
New Construction
Wastewater/Lift Stations
2” NPT discharge
1/2 HP
2” (50 mm) spherical solids capacity
Cast iron impeller
Available in 3 phase voltages
Motor: 1/2 HP
Voltage: 115-460 V
Hertz: 60 Hz
RPM: 1,750 RPM
Insulation: Class B