-40%
4LE11 1/2 HP Submersible Effluent Pump 230V 2

4LE11 1/2 HP Submersible Effluent Pump 230V 2" NPT Discharge Cast Iron

$ 246.61

Availability: 100 in stock
  • Return shipping will be paid by: Seller
  • Impeller Material: Polypropylene
  • GPM of Water @ 15 Ft. of Head: 84
  • Cord Length: 20"
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • HP: 1/2
  • GPM of Water @ 25 Ft. of Head: 65
  • Switch Type: None
  • GPM of Water @ 40 Ft. of Head: 20
  • Motor Type: Oil Filled PSC
  • Brand: DAYTON
  • GPM of Water @ 10 Ft. of Head: 92
  • Condition: Open box. Packaging in distressed condition, pump unaffected.
  • Phase: 1
  • GPM of Water @ 20 Ft. of Head: 76
  • Height: 17-5/16"
  • Shaft Seal: Silicon Carbide
  • Housing Material: Cast Iron
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: 4LE11
  • Duty: Intermittent
  • Bearing Type: Ball
  • Top Material: Cast Iron
  • Motor RPM: 3450
  • Item: Submersible Effluent Pump
  • GPM of Water @ 5 Ft. of Head: 96
  • Base Material: Cast Iron
  • GPM of Water @ 30 Ft. of Head: 53

    Description

    Submersible Effluent Pump
    SPECS
    Dayton submersible ejectors are self-contained and recommended for use in a sump or basin, where they should be vented in accordance with local plumbing codes. They are designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United Stated Electrical Code (NEC), ANSI/NFPA 70. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and suction will become plugged.